Bagging Bagging is a negative paint technique, which means you paint on the top coat, and then remove some of this paint with a plastic bag by padding over the surface. The bagging finish provides a strong effect as the print left behind has sharp edges. Bagging is suitable for large surface areas such as feature walls and above and below chair rails. Step 1 Apply a base coat using Bristol Easy Living Low Sheen, Satin or Bristol Opulence in a colour of your choice by brush or roller, and allow to dry. Step 2 Mix the top coat using Bristol Scumble and Bristol Easy Living Low Sheen, Satin or Bristol Opulence. It is recommended to mix the top coat in a bucket and pour into a roller tray when ready to paint. Mix 1 part Scumble to 1 part paint, or for a more translucent effect increase the ratio of Scumble eg; 2:1 or 3:1. Step 3 Apply the top coat liberally over the base coat with a brush or roller. Work in an area of around 1 metre square. Bristol Scumble has a work time of 10 – 20 minutes, so it is advisable to work quickly. Step 4 Scrunch the plastic bag in a large ball. Firmly pat the bag over the top coat turning the bag frequently to produce random patterns. Work in an area of around 1 metre square when bagging a large surface and ensure patterns join evenly. You have the ability to change the pattern if desired within 10 – 20 minutes of applying the top coat. Handy Hint Have a couple of plastic bags available Tools you will need Bristol Scumble, Your two favourite colours in Bristol Easy Living Low Sheen, Satin or Bristol Opulence, Plastic Bags, Paint Brush, Roller Tray and Roller, Practice Cardboard. Suggested Colour Scheme: Base Coat: Blue Rinse, Top Coat: Pansy